Desanders and desilters is the necessary solids control equipments

Desanders and desilters are solid control equipment with a set of hydrocyclones that separate sand and silt from the drilling fluids in drilling rigs. Desanders are installed on top of the mud tank following the shale shaker and the degasser, but before the desilter. Desander removes the abrasive solids from the drilling fluids which cannot be removed by shakers. Normally the solids diameter for desander to be separated would be 45~74μm, and 15~44μm for desilter. A centrifugal pump is used to pump the drilling fluids from mud tank into the set of hydrocyclones.
Desanders have no moving parts. The larger the internal diameter of the desander is, the greater the amount of drilling fluids it is able to process and the larger the size of the solids removed. A desander with a (10 inches (250 mm) cone) is able to remove 50% of solids within the 40-50 μm (micrometer) range at a flow rate of 500 US gallons per minute (32 L/s), while desilter (4 inches (100 mm) Cone) is able to remove 50% of solids within the 15-20 μm range at a flow rate of 60 US gallons per minute (3.8 L/s). Micro-fine separators are able to remove 50% of solids within the 10-15 μm range at a flow rate of 15 US gallons per minute (0.95 L/s). A desander is typically positioned next-to-last in the arrangement of solids control equipment, with a decanter centrifuge as the

subsequent processing unit. Desanders are preceded by gas busters, gumbo removal equipment (if utilized), shale shaker, mud cleaner (if utilized) and a vacuum degasser. Desanders are widely used in oilfield drilling. Practice has proved that hydrocyclone desander is a kind equipment of economic and effective.
The desander device is used for clarifying recover mud in circulation hole, It can cut down construction cost and reduce environmental pollution. It is necessary equipment for civilized construction. Consists of 10“ or 12“ hydraulic cones and manifold with convenient maintenance. The cones are made of high degree wear resiatant material which ensures a longer working life. The underflow opening controls the capacity by adjusting its size. KOSUN possesses a professional solid control engineers team to provide our clients with complete worldwide service, including solid control equipment and system manufacturing, OEM production, equipment lease, drilling rig system design and manufacturing as well as installation, debugging, maintenance and training of KOSUN products.
KOSUN is a leader of solid control system and expert of drilling waste management in China oil drilling mud solids control industry.As the pioneer in this industry,KOSUN is capable of providing customers with series products ,such as oil & gas drilling fluid solids control equipment, decanter centrifuge, drilling waste management equipment and drilling security equipment.
The products we can provide for oilfield and drilling fluid processing system including drilling mud shale shaker,drilling fluid mud cleaner,desander, oilfield drilling desilter,drilling fluids decanter centrifuge,vacuum degasser,mud tanks,mud gun,mud agitator,drilling mud centrifugal pumps and all the other solids control equipment,complete solids control system,etc.