Keeping Oil Mud Shale Shaker's Normal Operation in High Temperature

Condition temperature is one of the affected factors to make sure normal operation for shale shaker. In summer, temperature condition always surpasses what shale shaker could bear. Generally, 40 centigrade is the limit temperature for shale shaker working condition. Therefore, not only production conditions but also working condition, especially temperature factor should be taken into consideration for the equipment itself. The following description will focus on effective measures to make sure normal operation of shale shaker preventing high temperature conditions.
1/ Setting up shelter to reduce high temperature directly to shakers.

Excessive expose under the sun tends to make the machine reduce its service life and also may lead to faults as high working temperature of the whole machine, which will affects separation quality and efficiency, even causes machine parts damage such as damaged vibration motors. If shale shaker is operated indoor or cave dwelling, workers should be aware of adjusting the indoor temperature in order to keep ventilation. As long as make sure condition temperature is low than 40 centigrade for shakers, machine will be operated in good condition.

2/ Generally, high temperature of shale shaker mainly comes from vibration motor. If high temperature concentrates on the motor, it will have great influence its insulation material and easily causes low service life of shale shaker. So a temperature limit device is installed in the motor to reminder high temperature risk and some instant measures such as lower the temperature condition.

3/ Another crucial points should be pointed that proper selection of suitable motor can’t be ignored either. Accordingly, motors can never be too low power to save money which will easily cause unqualified operation effect and low service life of the motor. On the contrary, the motor power is not allowed to be increased excessively for high capacity of shale shaker. If larger power motor is installed, high operation frequency would damage the whole machine.

KOSUN can manufacture types of drilling fluid solids control systems according to the requirements of different drilling conditions. KOSUN is well-know as a professional manufacturer and supplier of oil drilling solids control equipment in China. After 20 years development,KOSUN is becoming more and more stronger,can provide more efficient equipments at the same time, the products including shale shaker, shale shaker screen, desander, desilter cone, vertical centrifuge,vacuum degasser, centrifugal pump, submersible slurry pump, shear pump,mud agitator, mud gun, drilling fluid mud cleaner, decanter centrifuge, jet mud mixer, mud tank, diesel tank, water tank, complete solids control system,etc.

http://www.china-kosun.com/kosun-drilling-waste-management/vertical-centrifuge.html